Bộ thông báo khẩn cấp Amperes,
Bộ thông báo khẩn EP1200 trong
hệ thống âm thanh thông báoBộ thông báo khẩn cấp là loại Thiết bị đầu vào, giải mã tín hiệu trong
hệ thống âm thanh thông báo công cộng
- Tích hợp sẵn tiếng còi báo động (tín hiệu liên tục)
- Chỉ báo trực quan đèn "FIRE"
- Chức năng kích hoạt thiết bị ghi âm thông báo khẩn gắn ngoài
- Có 2 chế độ kích hoạt tiếng còi báo động
- Cung cấp tiếp xúc khô (dry contact) khi thông báo được kích hoạt
- Ưu tiên thông báo thông qua micro ở bảng điều khiển phía trước, bỏ qua tất cả các nguồn âm thanh khác
- Có thể điều khiển âm lượng đầu ra cho tiếng còi báo động hay micro thông báo
- Giao tiếp RS485
EP1200 [ EMERGENCY PAGING PANEL ]
INTRODUCTION
EP1200 is an essential paging tool for firemen during emergency, or when direct paging to all zone is required at the equipment rack. It shall allow direct access to the PA system which would bypass incoming BGM or other normal paging in progress.
Its built in siren tone generator can be triggered manually via the front panel switch or via external fire sensor or fire switch by providing a close contact to the connector at the back of the unit.
EP1200A is enhanced version with RS485 data output, enabling the unit to be used together with iPX5150 IP client for LAN based PA System. Emergency paging and siren activation shall be available throughout the entire network from main rack. Other local features shall remain as EP1200, but with improved audio quality.
FEATURES
| Built in siren tone generator (constand signal) |
| Visual FIRE indicator |
| External voice message activation |
| Dual mode siren tone activation |
| Dry contact when paging mic is activated |
| Priority paging via front panel microphone, bypassing all other audio sources |
| Output level controls for siren and message / paging microphone |
TECHNICAL SPECIFICATIONS
Power requirement | 24V DC |
Power consumption | 3.5W |
|
MICROPHONE |
Mic sensitivity | -72 dB Omni directional |
Impedance | 600 Ohm |
Frequency response | 300 - 8 KHz |
|
SIREN |
Siren frequency | Continuous at 8 KHz |
Siren duration | Continuous when activated |
Siren activation | Front test switch / remote contact |
|
Input channel | Pre-amplifier output, message recorder |
Output level | Balanced line out (1.2V) |
Priority sequence | Paging mic - siren - message - pre amp in |
Indicators | Front FIRE with backlight illumination |
Dimension (WxHxD) | 482 x 88 x 180 mm |
Weight | 3.0 kg |
Sơ đồ lắp đặt
Bộ thông báo khẩn cấp trong
hệ thống âm thanh thông báo công cộng
Sản phẩm này không có hình ảnh khác